The products can be used to validate face-to-respirator seal on any disposable respirators or half mask respirators. Not suitable for fit testing full facepiece respirators - this must be through Quantitative face fit testing. To fit test a half mask respirator, it must be fitted with a P3 particulate filter for the fit test. 3M offers two Qualitative Fit Test Apparatus Kits FT-10 (Sweet) and FT-30 (Bitter). FT-10 uses a test solution of sodium saccharin that produces a sweet tasting aerosol. FT-30 uses a test solution of denatonium benzoate to produce a bitter taste. The choice between the bitter and sweet test kit is a personal one. However, a small percentage of the population is unable to detect saccharin in which case the bitter test must be used (and visa versa if the bitter cannot be detected then the sweet must be used). 3M recommends users are face-fit tested before using a respirator and repeated regularly as part of their occupational respiratory protection program. Follow all applicable national and other guidance with respect to face fit testing. If not available, please see ISO 16975-3 or contact 3M.
- Qualitative fit test kit including hood, collar, 2 nebulisers, bitter tasting sensitivity solution, bitter tasting fit test solution and laminated user instructions
- Spare hoods, nebulisers and solutions are also available
- For Occupational Use Only
- Follow all applicable national and other guidance with respect to face fit testing. In the UK please see further guidance from the Health and Safety Executive (HSE) and their guidance document INDG 479 or contact 3M
Specifications: